Chapter5. Sick buildings-Reading

the relative importance of any single source depends on how much of a given pollutant it emits and how hazardous those emissions are. in some cases, factors such as how old the source is and whether it is properly maintained are significant. for example, an improperly adjusted gas stove can emit significantly more carbon monoxide than one that is properly adjusted.
some sources, such as building materials, furnishings, and household products like air fresheners, release pollutants more or less continuously. other sources, related to activities carried out in the home, release pollutants intermittently. these include smoking, the use of unvented or malfunctioning stoves, furnaces, or space heaters, the use of solvents in cleaning and hobby activities, the use of paint strippers in redecorating activities, and the use of cleaning products and pesticides in house-keeping. high pollutant concentrations can remain in the air for long periods after some of these activities.
amount of ventilation
if too little outdoor air enters a home, pollutants can accumulate to levels that can pose health and comfort problems. unless they are built with special mechanical means of ventilation, homes that are designed and constructed to minimize the amount of outdoor air that can "leak" into and out of the home may have higher pollutant levels than other homes. however, because some weather conditions can drastically reduce the amount of outdoor air that enters a home, pollutants can build up even in homes that are normally considered "leaky".
how does outdoor air enter a house?

outdoor air enters and leaves a house by: infiltration, natural ventilation, and mechanical ventilation. in a process known as infiltration, outdoor air flows into the house through openings, joints, and cracks in walls, floors, and ceilings, and around windows and doors. in natural ventilation, air moves through opened windows and doors. air movement associated with infiltration and natural ventilation is caused by air temperature differences between indoors and outdoors and by wind. finally, there are a number of mechanical ventilation devices, from outdoor-vented fans that intermittently remove air from a single room, such as bathrooms and kitchen, to air handling systems that use fans and duct work to continuously remove indoor air and distribute filtered and conditioned outdoor air to strategic points throughout the house. the rate at which outdoor air replaces indoor air is described as the air exchange rate. when there is little infiltration, natural ventilation, or mechanical ventilation, the air exchange rate is low and pollutant levels can increase